Shop Concrobium products

Concrobium Mold Control Aerosol Spray, 14.1 oz

$15.26

Free Shipping

Quantity
1×14.1oz aerosol

Limit 3 per order. Sizes and packs of this product share the limit.

  • PayPal
  • Amazon
  • Reliable deliveryFree expedited shipping · Estimated delivery: 2–3 business days
  • Easy to make rightEligible items have 30-day returns
  • Freshness promisedUnopened, in-date and ready to use
Product details & specifications

A closer look

About this product

One aerosol can for directed mold and mildew control

Concrobium Mold Control supplies one 14.1-ounce aerosol can for directed mold and mildew control and prevention on permitted materials. Its treatment depends on even application and complete drying, with the moisture conditions that support growth corrected. Choose the aerosol for the selected package format and retain its complete label, including area-size precautions and pressurized-container handling requirements.

Prepare the area and allow the treatment to dry completely

Remove heavy soil and as much dirt and mold as possible, then ensure the surface is thoroughly dried. Apply Concrobium until the area is evenly wet. Wipe away excess wetness with a clean cloth or paper towel if desired and allow treated surfaces to dry completely. Test an inconspicuous section if in doubt, and wipe watermark-vulnerable materials immediately after contact.

Distinguish mold treatment from stain whitening

Stains may remain after treatment and some staining can be irreversible. If further stain-removal steps are taken, reapply Concrobium as the final step to protect against regrowth. Reapply weekly or when growth or odor returns, determining and correcting the cause first. The label calls for trained remediation procedures for affected areas larger than thirty square feet.

Keep protective equipment and aerosol storage with the task

For areas smaller than thirty square feet, the label recommends an N-95 respirator, gloves and goggles or eye protection against mold exposure. Larger areas require the stated additional protection and procedures. Use adequate ventilation, avoid breathing mist and avoid eyes, skin and clothing. Keep away from heat and ignition sources, protect from sunlight and do not expose above 122 degrees Fahrenheit.

The details that matter

Specifications

Product identity

Product identity specifications
BrandConcrobium
UPC / GTIN897946000825

Format & quantity

Format & quantity specifications
Quantity1×14.1oz aerosol

Features & care

Features & care specifications
RoleMold/mildew control and prevention;complete drying required
MethodPrepare;evenly wet;wipe excess if desired;dry completely
Area scopeOver30sqft requires trained remediation/special PPE
PrecautionsVentilation;gloves/eye protection;N95perarea instructions
Aerosol storageNo heat/ignition/pierce/burn;sun protection;122Fmaximum

Orders are fulfilled by trusted retail distribution partners. Packaging may identify a fulfillment partner; Shipabob remains your point of contact.

Shipping, fulfillment & returns

Free expedited U.S. shipping with estimated delivery in 2–3 business days, including handling. See our shipping policy for cutoff times and handling and transit days.

We’ll email tracking as soon as your order is on the way. Orders are fulfilled by trusted retail distribution partners, so packaging may identify a fulfillment partner. Eligible items may be returned within 30 days; see our policies for complete terms.

Need help?

Shipabob is your point of contact for every order. Email [email protected] or send us a message.

Questions about this product

What quantity and application format does this option include?

This offer supplies one 14.1-ounce aerosol can of Concrobium Mold Control. Retain the aerosol’s own application and pressure precautions with the task. The directed mold treatment includes preparing the area, applying until evenly wet, wiping excess wetness if desired and allowing complete drying, with the cause of moisture addressed.

Does the treated area need to dry fully?

Yes. Apply until evenly wet and allow treated surfaces to dry completely; wipe excess wetness with a clean cloth or paper towel if desired. Correct the moisture conditions favorable to mold growth. On materials vulnerable to watermarks, wipe immediately after contact, and test a small inconspicuous area if compatibility is uncertain.

Will this make every existing mold stain disappear?

Some staining may remain visible and can be irreversible. If additional stain-removal steps are taken after treatment, reapply Concrobium as the final step to protect the area from regrowth. Keep complete drying and moisture correction with the method, and reapply weekly or when growth or odor reappears as directed.

What changes when the affected area is larger than thirty square feet?

Areas larger than thirty square feet require special procedures and individuals trained in remediation. The label specifies an N-95 or half-face respirator with HEPA filter, disposable overalls, gloves and goggles or eye protection for those applications. Retain the complete remediation instructions and area assessment rather than treating every project as a small household spot.

What aerosol and contact precautions apply during storage and use?

Keep the can away from heat, hot surfaces, sparks, flames and other ignition sources. Do not pierce or burn it, even after use. Protect from sunlight and do not expose above 122 degrees Fahrenheit. Use adequate ventilation, avoid mist and contact, wash after handling and retain the original container’s complete precautions.

  • 5 stars: 6 (67%)
  • 4 stars: 1 (11%)
  • 3 stars: 0 (0%)
  • 2 stars: 1 (11%)
  • 1 star: 1 (11%)
K
KathyB
Really hard to spray

The aerosol sprayer is badly designed. It's very hard to press down, even when unlocked. Skip this one and get the non-aerosol version.

h
howard
Before and after my car sat for a month

It works great, but out of the three cans, one was damaged, and they say there are no refunds. I'm not sure what to do, so I'm going to try returning it in store and hope they take it back.

N
Nancy

It works great for getting rid of mold.

D
Dee
It definitely got rid of the smell

I'm not sure whether this kills mold or just stops it from growing, but it's definitely gotten rid of the mildew smell for 2 days now. The mold in my shower has dried up and can be scrubbed off. I feel like I got my money's worth, but going forward I'll use bleach to prevent it.

L
Linda

I've had a mold problem and need abatement on one wall downstairs. Every few days I run a UV light for 30 minutes in the moldy part of the basement and spray it with this Concrobium mold control. I'm hoping to get the wall completely dry before the abatement, and I can already tell a difference in the air quality. Groceries that used to mold quickly aren't doing that anymore, so I highly recommend it. Be careful around pets and kids. I use it in a basement room that's easy to keep people out of.

B
Bonnie
Safe

Good stuff. There's no bleach, and it's safe for septic tanks.

s
sara
It works well.

It does the job. I'd buy it again if I needed to.

t
tabitha
Junk

It arrived today & won't spray. It sprayed for a few seconds and then quit. Now it just drips, which an aerosol shouldn't do. Conveniently, there's no return option, so I'm out $12. Don't buy it.

c
crystal
Got a mold smell? Give this a try

Okay, I'm seriously impressed! A lot of water spilled on the leather seats in my car, and after a few days they started smelling like mildew. I called around about a professional cleaning to get rid of the smell, and omg, it's hundreds of dollars! I bought this can, and after 3 full days of soaking my leather seats with it, the smell was GONE! I'm soooooo happy! Then I cleaned and polished the seats, and voila, brand new! Every day when I get in my car, I sniff the air, and there's still no stink! Yay