Quick Shine Hardwood Floor Luster, Pfas-Free Formula Floor Polish with Plant-Derived Carnauba, 27 fl oz
$12.07
Free Shipping
- Formula
- Ready to use;pH neutral;PFAS free;fragrance free
SKU: SB-003784
- Reliable deliveryFree expedited shipping · Estimated delivery: 2–3 business days
- Easy to make rightEligible items have 30-day returns
- Freshness promisedUnopened, in-date and ready to use
A closer look
About this product
One twenty-seven-fluid-ounce Hardwood Floor Luster
Quick Shine Hardwood Floor Luster supplies one twenty-seven-fluid-ounce bottle for adding a protective, carnauba-enriched luster to clean, dry, sealed hardwood floors. The ready-to-use polish contains plant-derived carnauba within a water-borne polymer formulation. It adds a protective layer that helps even the appearance of fine surface scratches while renewing the wood floor’s richness and glow.
Choose the hardwood finish before applying polish
Use on sealed hardwood floors; do not apply to unsealed or worn wooden floors, and test a hidden area first. Check the trial spot for satisfactory results before treating the wider floor. The brown-label Hardwood Floor Luster is the wood-focused choice, so retain that product identity when comparing it with a general multi-surface floor finish or a routine floor cleaner.
Prepare a clean, dry surface and spread evenly
Remove loose dust and clean the floor before applying the luster, allowing it to dry fully. Apply in an S-shaped pattern and spread evenly with a freshly rinsed microfiber or sponge mop. Use the applicator damp rather than dirty, keeping collected grit, hair and floor soil out of the new protective layer as it is distributed.
Allow the applied layer to dry completely
The selected bottle’s directions give approximately forty-five to sixty minutes for drying to a gloss. Keep foot traffic off the treated area until completely dry. If a higher gloss is desired, apply another coat only after the previous layer has dried fully. Treat the drying estimate as part of the application method, retaining the requirement for a completely dry surface.
Maintain the luster with separate cleaning steps
The formula is fragrance free. Quick Shine identifies the product as PFAS free and pH neutral, and the bottle carries the EPA Safer Choice label. Maintain the finished floor by periodic dry dusting and appropriate cleaning for heavier soil. Keep the product away from children, avoid eye contact, do not swallow it and do not mix it with other cleaners or chemicals.
The details that matter
Specifications
Product identity
| Brand | Quick Shine |
|---|---|
| Manufacturer model | 1207-00027A |
| UPC / GTIN | 078786777737 |
Format & quantity
| Formula | Ready to use;pH neutral;PFAS free;fragrance free |
|---|
Features & care
| Supply | 1 bottle;27 fl oz |
|---|---|
| Product | Hardwood Floor Luster;plant-derived carnauba enriched |
| Use | Clean,dry,sealed hardwood floors |
| Application | S pattern;freshly rinsed damp microfiber/sponge mop |
| Selected-label drying | Approximately45–60 minutes;completely dry before traffic/recoat |
| Label | EPA Safer Choice |
| Precautions | Keep away from children;avoid eyes;do not ingest or mix cleaners |
Orders are fulfilled by trusted retail distribution partners. Packaging may identify a fulfillment partner; Shipabob remains your point of contact.
Shipping, fulfillment & returns
Free expedited U.S. shipping with estimated delivery in 2–3 business days, including handling. See our shipping policy for cutoff times and handling and transit days.
We’ll email tracking as soon as your order is on the way. Orders are fulfilled by trusted retail distribution partners, so packaging may identify a fulfillment partner. Eligible items may be returned within 30 days; see our policies for complete terms.
Need help?
Shipabob is your point of contact for every order. Email [email protected] or send us a message.
Questions about this product
Is this one bottle or the manufacturer’s two-bottle package?
This selected offer supplies one twenty-seven-fluid-ounce bottle of Hardwood Floor Luster. The applicator is separate. Retain the brown-label hardwood formulation and bottle volume with the purchase, because a manufacturer’s multi-bottle package or another Quick Shine floor-care product describes a different supply from this individual bottle.
Should the luster be applied before cleaning the floor?
No. Begin with a clean, dry, sealed hardwood floor. Remove dust and soil before spreading the ready-to-use polish with a freshly rinsed, damp microfiber or sponge mop. The luster adds a protective appearance layer; routine floor cleaning remains a separate step before application and during later maintenance.
When can another coat be applied or people walk on the floor?
Wait until the applied layer is completely dry. The selected bottle gives approximately forty-five to sixty minutes for drying to a gloss. An additional coat can increase the gloss after full drying, and foot traffic should also wait until the treated area is dry. Retain that condition rather than relying only on a timer.
Does the polish repair deep damage in the wood?
It adds a protective layer and helps even the appearance of fine surface scratches. That appearance benefit does not replace repair of deep damage or restore a worn, unsealed floor finish. Test a hidden area first and use the product on suitable sealed hardwood, maintaining the surface with the appropriate separate cleaning routine.
A closer look
About this product
One twenty-seven-fluid-ounce Hardwood Floor Luster
Quick Shine Hardwood Floor Luster supplies one twenty-seven-fluid-ounce bottle for adding a protective, carnauba-enriched luster to clean, dry, sealed hardwood floors. The ready-to-use polish contains plant-derived carnauba within a water-borne polymer formulation. It adds a protective layer that helps even the appearance of fine surface scratches while renewing the wood floor’s richness and glow.
Choose the hardwood finish before applying polish
Use on sealed hardwood floors; do not apply to unsealed or worn wooden floors, and test a hidden area first. Check the trial spot for satisfactory results before treating the wider floor. The brown-label Hardwood Floor Luster is the wood-focused choice, so retain that product identity when comparing it with a general multi-surface floor finish or a routine floor cleaner.
Prepare a clean, dry surface and spread evenly
Remove loose dust and clean the floor before applying the luster, allowing it to dry fully. Apply in an S-shaped pattern and spread evenly with a freshly rinsed microfiber or sponge mop. Use the applicator damp rather than dirty, keeping collected grit, hair and floor soil out of the new protective layer as it is distributed.
Allow the applied layer to dry completely
The selected bottle’s directions give approximately forty-five to sixty minutes for drying to a gloss. Keep foot traffic off the treated area until completely dry. If a higher gloss is desired, apply another coat only after the previous layer has dried fully. Treat the drying estimate as part of the application method, retaining the requirement for a completely dry surface.
Maintain the luster with separate cleaning steps
The formula is fragrance free. Quick Shine identifies the product as PFAS free and pH neutral, and the bottle carries the EPA Safer Choice label. Maintain the finished floor by periodic dry dusting and appropriate cleaning for heavier soil. Keep the product away from children, avoid eye contact, do not swallow it and do not mix it with other cleaners or chemicals.
The details that matter
Specifications
Product identity
| Brand | Quick Shine |
|---|---|
| Manufacturer model | 1207-00027A |
| UPC / GTIN | 078786777737 |
Format & quantity
| Formula | Ready to use;pH neutral;PFAS free;fragrance free |
|---|
Features & care
| Supply | 1 bottle;27 fl oz |
|---|---|
| Product | Hardwood Floor Luster;plant-derived carnauba enriched |
| Use | Clean,dry,sealed hardwood floors |
| Application | S pattern;freshly rinsed damp microfiber/sponge mop |
| Selected-label drying | Approximately45–60 minutes;completely dry before traffic/recoat |
| Label | EPA Safer Choice |
| Precautions | Keep away from children;avoid eyes;do not ingest or mix cleaners |
Questions about this product
Is this one bottle or the manufacturer’s two-bottle package?
This selected offer supplies one twenty-seven-fluid-ounce bottle of Hardwood Floor Luster. The applicator is separate. Retain the brown-label hardwood formulation and bottle volume with the purchase, because a manufacturer’s multi-bottle package or another Quick Shine floor-care product describes a different supply from this individual bottle.
Should the luster be applied before cleaning the floor?
No. Begin with a clean, dry, sealed hardwood floor. Remove dust and soil before spreading the ready-to-use polish with a freshly rinsed, damp microfiber or sponge mop. The luster adds a protective appearance layer; routine floor cleaning remains a separate step before application and during later maintenance.
When can another coat be applied or people walk on the floor?
Wait until the applied layer is completely dry. The selected bottle gives approximately forty-five to sixty minutes for drying to a gloss. An additional coat can increase the gloss after full drying, and foot traffic should also wait until the treated area is dry. Retain that condition rather than relying only on a timer.
Does the polish repair deep damage in the wood?
It adds a protective layer and helps even the appearance of fine surface scratches. That appearance benefit does not replace repair of deep damage or restore a worn, unsealed floor finish. Test a hidden area first and use the product on suitable sealed hardwood, maintaining the surface with the appropriate separate cleaning routine.
- Formula
- Ready to use;pH neutral;PFAS free;fragrance free
A closer look
About this product
One sixty-four-fluid-ounce hardwood polish
Quick Shine supplies one sixty-four-fluid-ounce bottle for adding a protective polish layer to clean, dry, sealed hardwood floors. Hardwood Floor Luster combines plant-derived carnauba with a water-borne polymer formula to refresh the appearance of suitable wood flooring. The polish adds a protective layer that helps fill micro-scratches and even out the floor’s appearance. The applicator mop is separate from the liquid supply.
Check the seal and prepare a clean, dry floor
Use on sealed wood floors; do not use on unsealed or worn wood floors, and test an unobtrusive spot first. Check the test for satisfactory results before treating a visible area. Remove dust, hair and dirt, and make sure the floor is clean and dry before polishing. Keep the flooring manufacturer’s care requirements with the preparation and application method.
Spread the polish with a freshly rinsed damp applicator
Apply in an S-shaped pattern and spread evenly with a freshly rinsed, damp microfiber or sponge mop. The polish is ready to use. Retain the clean-floor preparation and damp-applicator requirement so the application distributes the polish over the suitable surface. Keep the applicator’s own care instructions with the tool when preparing it for the polishing pass.
Allow complete drying before walking or another coat
The selected bottle states that the polish dries to a gloss in forty-five to sixty minutes. Do not walk on the floor until it is completely dry. Additional coats may be applied after complete drying if a higher gloss is desired. Keep the drying stage with each application rather than treating another coat as a substitute for preparing and checking the floor.
Maintain the finish and retain the container precautions
Maintain shine by periodically dry dusting with a microfiber pad. For heavier soil, the label identifies Quick Shine floor cleaners with a damp microfiber pad or sponge mop. Keep separate cleaners with their own directions. The formula is fragrance free. Keep it out of children’s reach, avoid ingestion, flush eye contact with water, and do not mix it with other cleaners or chemicals.
The details that matter
Specifications
Product identity
| Brand | Quick Shine |
|---|---|
| Manufacturer model | 1207-00064U |
| UPC / GTIN | 078786515605 |
Features & care
| Supply | 1 bottle;64 fl oz |
|---|---|
| Role | Protective hardwood polish;carnauba/water-borne polymer |
| Fragrance | Fragrance free |
| Floor | Sealed wood only;not unsealed/worn |
| Preparation | Hidden test;clean and dry floor |
| Apply | S pattern;freshly rinsed damp microfiber/sponge mop |
| Dry | 45-60minutes to gloss;complete drying before walking/recoat |
| Maintenance | Periodic microfiber dry dusting;separate Quick Shine cleaners |
| Removal | Quick Shine Deep Cleaner;separate product instructions |
| Handling | Children away;no mixing with other cleaners/chemicals |
Questions about this product
Should Hardwood Floor Luster be applied over a dirty floor?
Prepare a clean, dry, sealed hardwood floor before applying it. Remove dust, hair and dirt first, and test an unobtrusive area for satisfactory results. The polish provides a protective appearance layer, while the label identifies separate Quick Shine floor cleaners for cleaning heavier soil during later maintenance of the finish.
When can another coat be added?
Wait until the floor is completely dry before applying another coat for higher gloss. The selected bottle identifies forty-five to sixty minutes to dry to a gloss, and it also requires complete drying before walking on the floor. Retain that drying requirement with the clean, dry preparation and freshly rinsed damp applicator used for each polishing pass.
Can it restore an unsealed or worn-through wood floor?
Unsealed and worn wood floors are excluded. Use the polish on suitable sealed wood and test an unobtrusive spot first. Its protective layer helps fill micro-scratches and even the appearance of the surface; retain the floor’s actual condition and care requirements when deciding whether the identified polishing treatment is appropriate.
How is an improperly applied polish layer removed?
The bottle identifies Quick Shine Deep Cleaner for removing Hardwood Floor Luster that has not been properly applied or maintained. That is a separate product with its own directions. Keep those removal instructions with the chosen cleaner, and do not mix the polish with other cleaners or chemicals while maintaining or correcting the finish.
